- Talk With An Expert // +91-98786-05709, +91-98780-05709
Menu
washers
Wide Range of Washers Products
A washer is a thin plate with a hole that is normally used to distribute the load of a threaded fastener, such as a bolt or nut. Washer, machine component that is used in conjunction with a screw fastener such as a bolt and nut and that usually serves either to keep the screw from loosening or to distribute the load from the nut or bolt head over a larger area. For load distribution, thin flat rings of soft steel are usual.
FFI-Code : SW-6001
FFI-Code : CW-6002
FFI-Code : SW-6003
FFI-Code : HVW-6004
Characteristics
- Low friction CoF as low as 0.02.
- High corrosion and chemical resistance in most environments including marine and Oil & Gas
- Wide temperature operating range: from -420° to +550°F (-250° to 285°C)"
- Wide color range: color-code your product"
- Machinability: apply multiple coats of Xylan coating (most formulations) and mill to specification
- Wear resistance is very high, even under extreme pressures.
- Weather resistance: against sunlight, salt water and road chemicals
- Flexible curing schedule: ambient to 750°F (400°C).
- Pliability: Many Xylan coatings will bend freely and repeatedly without breaking.
- Salt spray SST life: above 1000 hrs.
Full Threaded Stud Bolts Applications
Washers are generally used with bolts & nuts in assemble to fill the gap in the drilled hole area and to provide a base for the nut to clamp. Washers are generally sold in pairs and 2 are used with every one bolt & nut in assembly.
FITWELL
Fasteners And Fittings Industries
Navigation
Material Grades
Contact Us
- Backside Nirankari Bhawan, Focal Point, VIII, Dharour, Dehlon Road, Sahnewal District, Ludhiana Punjab, India
- +91-98786-05709, +91-98780-05709
- info@fitwellfastener.com
© 2023 – Fitwell Fasteners & Fittings Industries. All Rights Reserved.